Engineering design, prototyping and manufacturing.

We design and build hardware for UAVs, race and road vehicles, and screw machines. Design, 3D printing, machining, electronics and testing are done by one team, in London.

a z1 = 5z2 = 6
Twin-screw rotor pair, 5/6 lobes, rack-generated profile

Sectors

Plan-view drawing of a twin-screw rotor pair with helical lobes, shafts and bearings

Screw machines

Screw compressors are our deepest specialism: oil-injected, oil-free and less common architectures, from a requirements sheet to a machine running on a test rig.

  • Rotor profiling, performance and optimisation calculations
  • Mechanical design of complete machines, including drive and motor integration
  • Production drawings to GD&T with tolerance analysis
  • Chamber-model and CFD-based simulation of screw machines and Roots blowers
  • Test rigs, instrumentation and performance testing
Triumph Trident 660 motorcycle fitted with Gineer parts, parked on a road
Triumph Trident 660 with parts from our brand Gineer

Motorsport, automotive and motorcycles

A decade around Formula Student electric race cars, plus our own line of motorcycle parts. We work on both the mechanical and the electrical side of a vehicle.

  • Electric powertrain design and integration
  • Motor controllers, battery management systems, telemetry and wiring harnesses
  • Brackets, mounts, covers and housings in metal, printed polymer and carbon fibre
  • Parts designed around an existing vehicle, with fit checked on a printed prototype first
General arrangement drawing of a fixed-wing VTOL UAV with four lift rotors and a pusher propeller, top and front views

UAV

Electronics and mechanical parts for unmanned aircraft, designed with weight and packaging as the first constraints.

  • Telemetry, control and power-management electronics
  • Lightweight enclosures, mounts and structural parts
  • Prototype builds, assembly documentation and small-batch manufacture
  • Fault-finding on platforms already in service

Services

Bring a blank page, a design that needs a second opinion, or a machine that needs proving on a rig. We also take on industrial machinery outside the three sectors above.

Mechanical design
Concept, CAD and detailed design in SolidWorks, Fusion 360 and Inventor, with design for manufacture and assembly considered from the start.
Simulation and analysis
FEA, thermofluid calculations and performance modelling, with Python and MATLAB tools written for the job where off-the-shelf software falls short.
Prototyping
Working prototypes built in-house, so a design change becomes a revised part in days and not a new purchase order.
Electronics and firmware
Circuit and PCB design, embedded firmware in C++, and control electronics including servo drives and high-voltage circuits.
Test rigs and data acquisition
Rigs designed and built to answer a specific question, with transducers, DAQ, LabVIEW or custom logging, and remote monitoring where it helps.
Testing and on-site support
Test plans, experiments and data analysis in our workshop, or hands-on help with assembly, commissioning and fault-finding at your site.
Design review and advice
An independent review of an existing design: what will be hard to make, what is likely to fail, and what to change.

Manufacturing

One-offs, prototypes and small production runs. Send a drawing or a 3D model, or have us design the part first.

3D printing
FDM and SLA, for prototypes, jigs, enclosures and end-use parts.
Metal machining
CNC and manual machining of prototype and production components.
Composites
Carbon-fibre layup and forged carbon parts.
Laser cutting and sheet metal
Flat parts, panels and brackets.
Soldering and PCB assembly
Boards, looms and wiring for prototypes and small batches.
Assembly
Mechanical and electro-mechanical builds, delivered as a working unit.
Example part drawing of a machined motor mount flange with dimensions and tolerances
3D-printed parts, circuit boards and a small motor laid out on a workbench
Printed parts and electronics from one of our own products

About

Krupa Industries is an engineering company based in London.

Our experience covers screw compressor design and research, electric powertrains for Formula Student race cars, electronics for UAV platforms, and hardware products taken from a sketch to crowdfunded production. We offer that mix as one service: the part is designed, made, wired and tested by the same team.

Contact

A few lines are enough to start: what it is, what it has to do, and when you need it. Drawings and models can follow by email.

info@krupa.industries

Your details are used only to reply to this enquiry. Privacy